3 Roll Single Pinch Type Plate Bending Roll
Features :
1. The Hydraulic Initial-Pinch Plate Rolls is designed for job-shop fabricator. It is simple to operate while producing high quality results.
2. All rolls are hardened at least to 50 Rc to reduce scratching and pitting and are journalled in high-quality roller bearings to provide longer life.
3. The top and lower rolls are driven by a high efficiency motor with built-in braking for getting high performance and result.
4. The hydraulic system and cylinders provide the power to adjust the lower (pinch) and rear (bending) rolls as well as the drop end for easy removal of the finished cylinder.
5. Controls on this machine is conveniently located and easy to use via the integrated console with all pushbuttons for all function and a standard LED readout provides fast and easy positioning of the rear bending roll for repetitive work.
6. A unique design on this machine is “Pinch Gauging Device” for added efficiency and to eliminate the guesswork of pinching pressure. This helps insure excellent repeatability.
7. The optional device on this machine is a set of hardened cone bending device for cone bending job. The other is cable type emergency stop device for more safety requested.
8. The working capacity range is suitable from 3mm - 16mm thickness by 900mm - 3000mm width. Rolls diameter is between 80mm and 240mm. Its production range is right just cover the most vast range of requirement in the market.
Specification:
|
MODEL |
Capacity |
Roll diameter |
Motor (HP) |
Weight |
L x W x H |
|
|
(mm) |
(mm) |
Drive |
HYD. |
(kgs) |
(mm) |
|
|
303E |
3 x 970 |
80 |
2 |
0.5 |
870 |
2460 x 1090 x 1170 |
|
402E |
2 x 1200 |
80 |
2 |
0.5 |
960 |
2760 x 1090 x 1170 |
|
403E |
3 x 1200 |
100 |
2 |
0.5 |
1150 |
2850 x 1090 x 1170 |
|
404E |
4 x 1200 |
120 |
2 |
1 |
1450 |
3050 x 1100 x 1350 |
|
407E |
7 x 1200 |
160 |
3 |
1 |
1950 |
3200 x 1200 x 1450 |
|
409E |
9 x 1200 |
180 |
5 |
2 |
2300 |
3300 x 1300x 1500 |
|
414E |
14 x 1200 |
200 |
5 |
3 |
3150 |
3400 x 1300 x 1500 |
|
501E |
1.5 x 1500 |
80 |
2 |
0.5 |
1080 |
3060 x 1090 x 1170 |
|
502E |
2 x 1500 |
100 |
2 |
0.5 |
1250 |
3060 x 1090 x 1170 |
|
503E |
3 x 1500 |
120 |
2 |
1 |
1650 |
3350 x 1100 x 1350 |
|
506E |
6 x 1500 |
160 |
3 |
1 |
2200 |
3500 x 1200 x 1450 |
|
508E |
8 x 1500 |
180 |
5 |
2 |
2600 |
3600 x 1300x 1500 |
|
512E |
12 x 1500 |
200 |
5 |
3 |
3500 |
3700 x 1300 x 1500 |
|
512S/H |
12 x 1500 |
200 |
7.5 |
3700 |
3700 x 1300 x 1500 |
|
|
516S/H |
16 x 2000 |
240 |
7.5 |
4000 |
3700 x 1400 x 1500 |
|
|
602E |
2 x 2000 |
120 |
2 |
1 |
1900 |
4000 x 1150 x 1400 |
|
605E |
4.5 x 2000 |
160 |
3 |
1 |
2500 |
4000 x 1200 x 1400 |
|
607E |
7 x 2000 |
180 |
5 |
2 |
2900 |
4000 x 1300 x 1400 |
|
610E |
10 x 2000 |
200 |
5 |
3 |
3950 |
4100 x 1300 x 1500 |
|
610S/H |
10x 2000 |
200 |
7.5 |
4200 |
4100 x 1300 x 1500 |
|
|
614S/H |
14 x 2000 |
240 |
10 |
4500 |
4100 x 1400 x 1500 |
|
|
803E |
3 x 2500 |
160 |
3 |
1 |
2850 |
4600 x 1200 x 1400 |
|
805E |
5 x 2500 |
180 |
5 |
2 |
3400 |
4600 x 1300 x 1400 |
|
808E |
8 x 2500 |
200 |
5 |
3 |
4500 |
4700 x 1300 x 1500 |
|
808S/H |
8 x 2500 |
200 |
10 |
4800 |
4700 x 1300 x 1500 |
|
|
812S/H |
12 x 2500 |
240 |
15 |
5200 |
4800 x 1400 x 1500 |
|
|
1004E |
4 x 3000 |
180 |
5 |
2 |
3800 |
5250 x 1300 x 1400 |
|
1006E |
6 x 3000 |
200 |
5 |
3 |
5000 |
5250 x 1400 x 1500 |
|
1006S/H |
6 x 3000 |
200 |
10 |
5300 |
5250 x 1400 x 1500 |
|
|
1008S/H |
8 x 3000 |
240 |
15 |
5900 |
5400 x 1500 x 1500 |
|
E series : rolls are driven by AC brake motor. S/H series : rolls are driven by hydraulic motor.
*All specifications above are subject to change without notice.
Standard Equipment
Direct-Drive Design is featuring constant and powerful torque direct to the roll rotation.
Sumitomo Cyclo® 6000 Gearless Speed Reducer.
Spherical roller bearings on all rolls for longevity and constant use.
Hydraulically powered rear bending roll. Raise and lower the bending roll hydraulically rather than a hand wheel seen on other brands.
Power tilting rear bending roll for cone rolling.
Digital readout for position of rear bending roll.
Hydraulically operated drop-end for quick removal of rolled product rather than using a pivoting roll.
Quick and Easy hydraulic lower pinch roll adjustment with pinch gauge control.
Dual Forward/Reverse rotation controls – Console mounted and foot pedal.
Upper and lower pinch rolls driven with direct gear contact.
All rolls heat treated to 50 Rc.
Manual tilt of the lower pinch roll.
Adjusting tools, pinch gauge stock, technical manual
Optional Equipment
Cone bending attachment.
Cable type Emergency stop device.
Infinitely Variable Speed Control.
Control Panel on Wheels.
Top Supports