Gear Head Drilling Machine - Gear Drive (Inverter Variable Speed)
Main specification :
1. Automatc spindle down feed mechanism : 3 automatic spindle down feed rates. When the automatic spindle down feed is engaged, the
tapping function will be turned off.
2. Drilling capacity: steel 40mm; cast iron : 45mm
3. Tapping capacity : 24mm
4. Swing : 530mm
5. Spindle Taper : MT#4
6. Spindle speed : Low: 65-540 rpm; High: 245-2000rpm
7. Automatic Quill Feed : 3 speeds, 0.2, 0.1, 0.05mm per revolution
8. Coolant system is option.
Specification:
|
MODEL |
DP-925GAD |
|
|
Drilling Capacity |
Steel |
40 mm |
|
Cast iron |
45 mm |
|
|
Tapping Capacity |
24 mm |
|
|
Swing |
530 mm |
|
|
Spindle Taper |
MT4 |
|
|
Spindle Travel |
150 mm |
|
|
Quill Diameter |
75 mm |
|
|
Column Diameter |
115 mm |
|
|
Spindle Nose to Table |
580 mm |
|
|
Spindle Nose to Base |
1135 mm |
|
|
Table Size (L x W) |
560 x 470 mm |
|
|
Table T Slot Size |
16 mm |
|
|
Base Size (L x W) |
685 x 485mm |
|
|
Spindle Speed (rpm) |
High: 245~2000 Low: 65~540 rpm |
|
|
Automatic quill feeds |
3 Speeds, 0.2, 0.1, 0.05mm per revolution |
|
|
Motor |
2HP/ 3PH |
|
|
Coolant motor |
1/8 HP |
|
|
Machine Size (L x W x H) |
872 x 580 x 2000 mm |
|
|
Net Weight / Gross Weight |
385 / 410 kgs |
|
|
Packing size (L x W x H) |
1003 x 635 x 2100mm / 48 cu.ft. |
|
*All specifications above are subject to change without notice.